Orca Vape and MrJustRight1 introduce the Ponte Boro Mesh RDTA, a rebuildable dripping tank atomizer for Boro devices. The Ponte is made from surgical grade stainless steel, with a PTGC tank section capable of holding 4.2ml of vape juice. The Ponte will fit most Boro style devices!
Using the tried-and-true stainless steel cable wicking system, the Ponte will continuously feed juice to the top mounted build deck. The build deck features a two post, clamp style, mesh coil system with spring-loaded insulated wick assist; which accommodates mesh strips up to 12mm in width (mesh strips sold separately). The Ponte comes with 4 pre-cut stainless steel cable wicks installed, and 2 spare pre-cut wicks. Airflow travels from beneath the Boro tank, up the side indentations, and through the top cap. The airflow can be adjusted from fully open, 3/4 open, and 1/2 open.
”Ponte” A word meaning bridge in Italian, Portuguese, and Galician.
"The purpose of this project wasn’t to reinvent the wheel, it was to do what should’ve been done with other rdta style boros in the past; and that is to allow airflow directly to the build deck. The indentations on the side of the boro tank allow airflow to travel up to the build deck without having to have custom doors made. With the placement of the mesh so close to the drip tip, the flavor is second to none as is the vapor production. This does lean more to the direct lung style, but can be adjusted down to accommodate all styles." - Orca Vape x MrJustRight1
Pro Tip: Make sure to pre-fire and oxidize your mesh strip at low wattage before wicking to ensure even heating and prevent hot spots. Make sure to tighten down the flush nut to ensure a solid ground connection from your Ponte to your Boro style box.
Included in Box:
- 1 x Ponte Boro Mesh RDTA
- 1 x 510 Adapter
- 1 x Spare Parts Bag